Vanquish Products VPS09014 VRD Mullet 1/10 Competition Rock Crawler Kit

Vanquish Products VRD Mullet 1/10 Competition Rock Crawler Kit is built on the competition-level platform proven by its predecessors, the VRD Carbon and VRD Stance. The VRD Mullet utilizes the lightweight Carbon Spec VFD transmission and a combination of an F10 straight front axle and F10 portal rear axle. The mix of straight front axle and portal rear axle has been referred to as a mullet setup in the RC crawling world for years. This complete kit brings that configuration together in a competitive, predictable and versatile platform. Taking advantage of the lower center of gravity that a straight axle offers, you can steer the front exactly where you need it, then take advantage of the additional clearance of the F10 portal rear axle to help prevent a hang-up from stopping your progress.

The VRD Mullet Kit features S25 frame rails optimized for the unique combination of axles and a 6-degree-angle flat skid plate. The molded chassis components and skid plate place the lightweight Carbon Spec VFD transmission as low as possible in the VRD chassis. The front F10 straight axle is equipped with a servo-on-axle layout and 4-link suspension.

In The Box

• VRD Mullet assembly kit with S25 chassis, Carbon Spec VFD transmission, F10 straight front axle and F10 portal rear axle
• Incision S8E shocks and suspension links
• Clear polycarbonate Stance Half Cab body, window masks and decal sheet
• 25-spline, 20mm servo horn

Needed to Complete

• Assembly tools and polycarbonate-compatible paint
• 1.9-inch tires, 4.75-inch height recommended
• 1.9-inch SLW-hub-compatible wheels; 475 front and 350 rear hubs recommended
• Transmitter and receiver
• Steering servo
• 540-size motor and compatible ESC
• Battery no larger than 35 x 35 x 100mm
• Compatible battery charger

Key Features

• Carbon Spec VFD transmission
• 3mm aluminum frame rails with a 6-degree flat skid plate
• 34% final overdrive
• Front axle underdrive machined ring and pinion gears
• Rear axle overdrive machined ring and pinion gears
• Portal rear axle overdrive gears
• Lightweight machined chromoly VFD transmission gears
• Chromoly universal axle shafts
• Hard-anodized shock bodies
• Stainless steel links with heavy-duty bent rear links
• Incision Pro M4 rod ends
• Stamped aluminum rock sliders
• Adjustable multipoint body mounting system

F10 Axles in Mullet Configuration

The F10 straight front axle uses the VPS08331 underdrive gear set (8/33), paired with the F10 portal rear axle and a VPS08332 overdrive gear set (8/32), plus overdrive portal gears. The F10 portal rear axle has a flipped third member to correct the portal rotation. Combined with a lightweight 21% gear set in the VFD transmission, the final overdrive is 34%. Vanquish recommends 475 SLW hubs at the front and 350 at the rear to accommodate the differing axle widths.

Carbon Spec VFD Transmission

The VFD is designed for performance, scale appearance, strength and versatile accessories. It positions the motor forward and low for weight distribution. The VFD Carbon Spec transmission offers 21% overdrive for turning and climbing. The transfer case features aluminum bearing plates for increased strength. The transmission is compatible with 540 brushed and brushless motors.

The combination of the F10 portal and straight axles blends the low center of gravity of a straight axle with the added clearance of a portal. Aim the front axle where you need it while the rear axle provides additional clearance. The Carbon Spec VFD includes a machined motor plate, standoffs and lightweight gears.

VRD S25 Chassis

The S25 chassis geometry balances the different axle types used on the VRD Mullet. Shortened rear chassis length improves departure angle while leaving room to customize the build behind the included Stance Half Cab body.

Molded chassis components provide a tunable platform for demanding terrain. The S25 is optimized for the axle configuration with new shock mounting positions and reduced rear overhang. Multiple shock and body mounting positions, combined with minimalistic interchangeable front and rear bumpers, simplify body mounting and fitment. Stamped aluminum rock sliders provide a flat location for electronics and battery mounting and help support and protect the body.

Suspension

The VRD uses Incision 90mm S8E shocks with 8mm-bore aluminum threaded bodies, dual O-ring seals, adjustable preload collars, keyed spring cups and polished steel shock shafts. The front 4-link suspension with servo-on-axle prioritizes steering effectiveness. Stainless steel links provide durability.

The included hard-anodized S8E shock bodies and multiple-length tuning rod ends provide a final shock-length range of 85–95mm. Heavy-duty stainless steel lower suspension links and lightweight upper links connect the chassis to the axles with Incision Pro M4 rod ends. The rear lower links are bent for breakover clearance. Multiple shock mounting locations and tunable shock length allow a wide range of ride-height and breakover adjustment.

Stance Half Cab Body

The included Stance Half Cab body comes in clear polycarbonate with window masks and a decal sheet, allowing you to customize the appearance of your Mullet build.

Specifications