Traxxas 97074-1-WHT TRX-4M Ford Bronco 1/18 RTR Crawler White
Couldn't load pickup availability
If you Like it SHARE it
Traxxas 97074-1-WHT TRX-4M Ford Bronco 1/18 RTR Crawler White combines a highly detailed ABS hard body with a steel ladder frame, full-time four-wheel drive and oil-filled GTM shocks. Its Titan 180 87-turn brushed motor and ECM-2.5 electronic control module deliver trail and crawling control in a compact package. A TQ 2.4 GHz transmitter, 750 mAh 2-cell LiPo battery and USB-powered charger are included.
In The Box
- Assembled TRX-4M Ford Bronco crawler with white clipless body
- TQ 2.4 GHz 2-channel transmitter
- Installed ECM-2.5 electronic control module
- Installed Titan 180 87-turn brushed motor and 2065T steering servo
- 7.4 V 750 mAh 2-cell LiPo battery with iD
- 2-amp USB-powered charger
Needed to Complete
- Compatible USB power source for the included charger
- Transmitter batteries
Officially Licensed Ford Bronco Clipless Body
The highly detailed ABS hard body features molded-in color that will not chip or flake, tough fender flares and rock sliders, realistic side mirrors, door handles and wipers, and LED bumper lights. Heavy-duty latching clips hold the body tightly on the trail and release in seconds.
ECM-2.5 Electronic Control Module
The ECM-2.5 incorporates the electronic speed control, receiver and LED controller in one chassis. The manufacturer describes the module as fully waterproof for all-weather use. Traxxas EZ-Set one-button setup, built-in Pro Scale LED functionality, two-stage low-voltage detection and motor overload protection are included.
Three drive profiles tailor the controls to the terrain. Sport Mode provides forward, brake and reverse. Trail Mode adds trail-tuned drag braking in neutral. Crawl Mode provides forward and instant reverse with no neutral and 100% hill-holding brake.
TQ 2.4 GHz Transmitter
The full-size, 2-channel transmitter offers all-day comfort with precise long-range control.
Titan 180 87-Turn Brushed Motor
The motor's fixed gear mesh does not require adjustment. Its forward mounting position improves crawling dynamics.
Heavy-Duty Steel Ladder Frame
The deep C-channel frame has a thicker center section for maximum rigidity. Its steel rails run from bumper to bumper.
Drivetrain
Full-time shaft-driven four-wheel drive uses solid steel axles, spool-equipped front and rear axles, and heavy-duty CV center driveshafts.
Low-CG Battery Tray
The battery tray concentrates weight lower in the chassis for improved stability. A wide rubber strap secures the battery in place.
Optional Transmission Ratios
Optional Low Range or Speed Gearing transmissions are sold separately. The modular transmission design swaps out in minutes.
Steering
The heavy-duty 2065T steering servo uses a metal main gear. Direct steering without a servo saver delivers a 45-degree steering angle.
Suspension
Triangulated 4-link suspension front and rear uses heavy-duty rod ends.
Oil-Filled GTM Shocks
Oil-filled GTM shocks provide smooth, controlled damping and realistic driving body movements. Adjustable pre-load spacers allow tuning, and available rebuild kits make the shocks easy to refresh.
Wheels and Tires
Highly detailed 1-inch wheels use a 7 mm hex. Replica BFGoodrich Mud Terrain T/A KM3 tires feature a trail-tuned rubber compound.
Battery and Charger Included
The high-capacity LiPo battery with iD provides 7.4 volts and 750 mAh capacity. The manufacturer claims over an hour of run time; actual run time varies with driving conditions and use. A 2-amp USB-powered charger is included, with iD technology for faster, safer charging.
Additional Features
Low-maintenance self-lubricating bushings and durable hex hardware support straightforward ownership and maintenance.
Specifications
| Manufacturer Model | 97074-1 |
| SKU | 97074-1-WHT |
| Color / Body Version | White |
| Scale | 1/18 |
| Vehicle | Ford Bronco crawler |
| Completion Level | RTR, assembled |
| Drivetrain | Full-time shaft-driven 4WD |
| Axles | Solid steel axles; spool-equipped front and rear |
| Center Driveshafts | Heavy-duty CV |
| Control Module | ECM-2.5 ESC, receiver and LED controller |
| Drive Profiles | Sport, Trail and Crawl |
| Motor | Titan 180 87-turn brushed |
| Radio | TQ 2.4 GHz, 2-channel |
| Steering Servo | 2065T with metal main gear |
| Steering Angle | 45 degrees |
| Steering Configuration | Direct steering, no servo saver |
| Chassis | Steel ladder frame, deep C-channel |
| Suspension | Triangulated 4-link front and rear |
| Shocks | Oil-filled GTM with adjustable pre-load spacers |
| Body | Officially licensed Ford Bronco ABS hard body with molded-in white color and clipless latches |
| Lighting | LED bumper lights; built-in Pro Scale LED functionality |
| Wheels | 1-inch, 7 mm hex |
| Tires | Replica BFGoodrich Mud Terrain T/A KM3, trail-tuned rubber compound |
| Included Battery | 7.4 V 750 mAh 2S LiPo with iD |
| Included Charger | 2-amp USB-powered |
| Bearings/Bushings | Self-lubricating bushings |
| Model Name | TRX-4M Ford Bronco |
| Model Type | Trail / Crawler |
| Skill Level | 1 |
| Vehicle Weight | 1.03 pounds (468 g) |
| Length | 10.3 inches (262 mm) |
| Width | 4.9 inches (124 mm) |
| Front Track | 4.9 inches (124 mm) |
| Rear Track | 4.9 inches (124 mm) |
| Height | 4.6 inches (117 mm) |
| Wheelbase | 6.1 inches (155 mm) |
| Center Ground Clearance | 1.12 inches (29 mm) |
| Transmission | Single-speed direct drive |
| Differential Type | Locked spool |
| Internal Gear Ratio | 11.38 |
| Gear Pitch | 64 pitch |
| Battery Compartment | 51 mm L × 31 mm W |
| Motor Type | 87-turn brushed motor |
| Motor Weight | 1.16 ounces (33 g) |
| Motor Length | 1.66 inches (42 mm) |
| Motor Diameter | 0.81 inches (21 mm) |
| ESC Name | ECM 2.5 |
| ESC Type | Brushed |
| ESC Case Size | 1.79 inches (45 mm) × 1.26 inches (32 mm) × 0.6 inches (15 mm) |
| ESC Weight | 0.92 ounces (26 g) |
| Platform | TRX-4M |