Traxxas 97074-1-BLUE TRX-4M Ford Bronco 1/18 RTR Crawler Blue

In stock
SKU: 97074-1-BLUE Barcode: 020334971142
Regular price $ 179.95

Traxxas 97074-1-BLUE TRX-4M Ford Bronco 1/18 RTR Crawler Blue combines a highly detailed ABS hard body with a steel ladder frame, full-time four-wheel drive and oil-filled GTM shocks. Its Titan 180 87-turn brushed motor and ECM-2.5 electronic control module deliver trail and crawling control in a compact package. A TQ 2.4 GHz transmitter, 750 mAh 2-cell LiPo battery and USB-powered charger are included.

In The Box

  • Assembled TRX-4M Ford Bronco crawler with blue clipless body
  • TQ 2.4 GHz 2-channel transmitter
  • Installed ECM-2.5 electronic control module
  • Installed Titan 180 87-turn brushed motor and 2065T steering servo
  • 7.4 V 750 mAh 2-cell LiPo battery with iD
  • 2-amp USB-powered charger

Needed to Complete

  • Compatible USB power source for the included charger
  • Transmitter batteries

Officially Licensed Ford Bronco Clipless Body

The highly detailed ABS hard body features molded-in color that will not chip or flake, tough fender flares and rock sliders, realistic side mirrors, door handles and wipers, and LED bumper lights. Heavy-duty latching clips hold the body tightly on the trail and release in seconds.

ECM-2.5 Electronic Control Module

The ECM-2.5 incorporates the electronic speed control, receiver and LED controller in one chassis. The manufacturer describes the module as fully waterproof for all-weather use. Traxxas EZ-Set one-button setup, built-in Pro Scale LED functionality, two-stage low-voltage detection and motor overload protection are included.

Three drive profiles tailor the controls to the terrain. Sport Mode provides forward, brake and reverse. Trail Mode adds trail-tuned drag braking in neutral. Crawl Mode provides forward and instant reverse with no neutral and 100% hill-holding brake.

TQ 2.4 GHz Transmitter

The full-size, 2-channel transmitter offers all-day comfort with precise long-range control.

Titan 180 87-Turn Brushed Motor

The motor's fixed gear mesh does not require adjustment. Its forward mounting position improves crawling dynamics.

Heavy-Duty Steel Ladder Frame

The deep C-channel frame has a thicker center section for maximum rigidity. Its steel rails run from bumper to bumper.

Drivetrain

Full-time shaft-driven four-wheel drive uses solid steel axles, spool-equipped front and rear axles, and heavy-duty CV center driveshafts.

Low-CG Battery Tray

The battery tray concentrates weight lower in the chassis for improved stability. A wide rubber strap secures the battery in place.

Optional Transmission Ratios

Optional Low Range or Speed Gearing transmissions are sold separately. The modular transmission design swaps out in minutes.

Steering

The heavy-duty 2065T steering servo uses a metal main gear. Direct steering without a servo saver delivers a 45-degree steering angle.

Suspension

Triangulated 4-link suspension front and rear uses heavy-duty rod ends.

Oil-Filled GTM Shocks

Oil-filled GTM shocks provide smooth, controlled damping and realistic driving body movements. Adjustable pre-load spacers allow tuning, and available rebuild kits make the shocks easy to refresh.

Wheels and Tires

Highly detailed 1-inch wheels use a 7 mm hex. Replica BFGoodrich Mud Terrain T/A KM3 tires feature a trail-tuned rubber compound.

Battery and Charger Included

The high-capacity LiPo battery with iD provides 7.4 volts and 750 mAh capacity. The manufacturer claims over an hour of run time; actual run time varies with driving conditions and use. A 2-amp USB-powered charger is included, with iD technology for faster, safer charging.

Additional Features

Low-maintenance self-lubricating bushings and durable hex hardware support straightforward ownership and maintenance.

Specifications

Manufacturer Model 97074-1
SKU 97074-1-BLUE
Color / Body Version Blue
Scale 1/18
Vehicle Ford Bronco crawler
Completion Level RTR, assembled
Drivetrain Full-time shaft-driven 4WD
Axles Solid steel axles; spool-equipped front and rear
Center Driveshafts Heavy-duty CV
Control Module ECM-2.5 ESC, receiver and LED controller
Drive Profiles Sport, Trail and Crawl
Motor Titan 180 87-turn brushed
Radio TQ 2.4 GHz, 2-channel
Steering Servo 2065T with metal main gear
Steering Angle 45 degrees
Steering Configuration Direct steering, no servo saver
Chassis Steel ladder frame, deep C-channel
Suspension Triangulated 4-link front and rear
Shocks Oil-filled GTM with adjustable pre-load spacers
Body Officially licensed Ford Bronco ABS hard body with molded-in blue color and clipless latches
Lighting LED bumper lights; built-in Pro Scale LED functionality
Wheels 1-inch, 7 mm hex
Tires Replica BFGoodrich Mud Terrain T/A KM3, trail-tuned rubber compound
Included Battery 7.4 V 750 mAh 2S LiPo with iD
Included Charger 2-amp USB-powered
Bearings/Bushings Self-lubricating bushings
Model Name TRX-4M Ford Bronco
Model Type Trail / Crawler
Skill Level 1
Vehicle Weight 1.03 pounds (468 g)
Length 10.3 inches (262 mm)
Width 4.9 inches (124 mm)
Front Track 4.9 inches (124 mm)
Rear Track 4.9 inches (124 mm)
Height 4.6 inches (117 mm)
Wheelbase 6.1 inches (155 mm)
Center Ground Clearance 1.12 inches (29 mm)
Transmission Single-speed direct drive
Differential Type Locked spool
Internal Gear Ratio 11.38
Gear Pitch 64 pitch
Battery Compartment 51 mm L × 31 mm W
Motor Type 87-turn brushed motor
Motor Weight 1.16 ounces (33 g)
Motor Length 1.66 inches (42 mm)
Motor Diameter 0.81 inches (21 mm)
ESC Name ECM 2.5
ESC Type Brushed
ESC Case Size 1.79 inches (45 mm) × 1.26 inches (32 mm) × 0.6 inches (15 mm)
ESC Weight 0.92 ounces (26 g)
Platform TRX-4M