BSI Insta-Cure+ Gap Filling CA Glue – 3/4 oz BSI133

BSI Insta-Cure+™ (BSI133) is a medium-viscosity cyanoacrylate designed for loose-fitting joints where the adhesive must bridge gaps. Unlike thin CA, Insta-Cure+ stays in place on one surface while parts are pressed together, making it ideal for laminations, large surface areas, and any joint that isn’t perfectly tight.

Apply a serpentine bead to one surface — don’t spread it thin — then press parts together for 5–15 seconds. Full strength is reached in 2 hours.

Key Features

• Part Number: BSI133
• Size: 3/4 oz
• Viscosity: Medium (gap filling)
• Hold Time: 5–15 seconds
• Full Strength: 2 hours
• Bridges gaps in loose-fitting joints
• Ideal for laminations and large surface areas
• Compatible with BSI Insta-Set™ accelerator

Directions

Remove cap and cut off top 1/32" while holding bottle upright. Apply to one surface then hold parts tightly together for 10 seconds. Full strength reached in 2 hours. Replace cap after use for best shelf life.